1.   Grip tape - use fine to ruff , when it comes to grip tape you probably want to go with a fine grip tape, it won't ware your shoes as much.  Pick the kind you like the best.  If it has a pop out logo, carefully pop this piece out and put on the back of the board so you know the front from the back.  Start at the nose place the grip tape at the tip and run your hand down the middle of the board  and then smooth out from the center, eliminating any bubbles under the tape.  Score the edges of the board with a screw driver .  Starting at the end of the board, run a razor blade around the edge of the board cutting the excess grip tap off.Use sand paper to smooth sides if necessary. 

Hardware - Puncture holes from the top through the griptape then insert the Hardware screws through the holes in the deck from top down.